EZ Test for THC- 1 test

General:

The EZ test kit for THC in hash and marijuana makes it quick and easy to test for the presence of THC in samples such as hash, marijuana and hash oil. To perform the test, open the ampoule and insert the small ball into the cap of the ampoule breaker. Place your sample in the ampoule and let the ingredients mix for about 10 seconds. If THC is present, the colour will change to red.

Usage:

The THC Drug Test Kit is a recent addition to the range of EZ tests and is designed to test exclusively for THC. The colour change corresponds to the information sheet and colour chart provided. All EZ tests use a chemical reagent absorbed in silica gel in a glass ampoule. When a sample is added to these chemicals, a colour change will occur on reaction. This colour should be compared with the colour chart in the instructions to give an indication of what might be in the sample. If the ampoule is damaged before opening, contact the shop where it was purchased.

Instructions:

Step 1 - Prepare some of the substance for analysis. Only a small amount is needed, about a volume of 2 mm by 2 mm.

Step 2 - Tap the unopened ampoule against a hard surface several times to make any particles sticking to the side of the ampoule fall down.

Step 3 - Hold the ampoule in one hand and break off the top part along the break line, using thumb and forefinger.

Step 4 - Hold the ampoule upright and transfer your sample into the ampoule. After this, place the cap on the opened ampoule. ** Ehrlich and cannabis tests have a small pellet in the cap that acts as a catalyst and should also be added. ** ** A simple method to add your substance is to simply add the sample to the top of the cap and place the cap on the opened ampoule. **

Step 5 - Allow the sample and reagents/pellet to mix. A gentle shake and swirl may help.

Step 6 - Compare the colour change (if any) with the colours on the colour chart provided with the packaging. Each colour change should fully develop within 1-2 minutes.

Step 7 - When done, place the used ampoule in a sealed bag and dispose of it responsibly. Please do not just throw it away.

Warning:

Be sure to dispose of the ampoule and sample safely after testing. Keep in mind that the EZ test kits are only a guide to help analyse a substance and comprehensive laboratory testing of samples is recommended for more detailed results. It is not recommended to touch any substance.